ChainDrive™ Specifications

The ChainDrive is a 500 series module designed to distribute an audio signal to four destinations. The circuit is able to handle extreme signal levels in excess of +24dB with less than 0.002% distortion at all frequencies. The simplicity of the design further advantages with exceptionally low phase distortion and noise below the 120dB mark. This makes the ChainDrive the perfect 'distro' for routing all types of signals in the studio or other more demanding audio installations.

Click images to enlarge
Specifications are subject to change without notice.
*Refers to use with Radial Workhorse rack and mixer.
Circuit type: High performance audio op-amps
Frequency response: 20Hz to 20KHz
Maximum input: +24dBu
Maximum output: +28dBu
THD + N: <0.001%
Dynamic range: 124dB
Equivalent input noise: -104dBu
Gain: +4dB
Intermodulation distortion <0.002%
Common mode rejection ratio: 53dB
Input impedance: 10K-ohms
Controls 4 individual output controls
Connectors: 4 balanced TRS outputs
Indicators: Power status LED
Omniport: Unbalanced Input for Balanced Output
Power requirement: +/- 16V @ 33 mA
Shipping size (L x W x H) : 9 x 6.5 x 2 (inches) 229mm x 165mm x 51mm
Weight 1.5 lbs. (0.7 kg)
Conditions: For indoor use at temperatures between +5° c and +40° c
Warranty 3 Years, Transferable
Click to view larger