DiNET™ DAN-RX™ Specifications

The DAN-RX provides two channels of balanced audio output anywhere on a Dante-enabled digital network. 24bit / 96kHz audio converters provide exceptional audio quality, with over 100dB of dynamic range and incredibly low distortion. A built-in headphone amp provides an easy way to test audio or use as a personal monitoring system with a local level control. 14-gauge steel housing and a bookend design protect the connectors and allow the DAN-RX to withstand the rigours of professional touring and rental without failure.


Specifications   
Audio Circuit Type:  High current balanced active output device
Number of Channels: 2
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, and 96kHz
Bit Depth: 24 bit
Network Speed: 100Mbps
Frequency Response: 20Hz - 20kHz
Idle Channel Noise:  -108dB
Dynamic Range: >100dB
Channel Separation: >75dB
Gain: 8dBu max @ -6dBfs
Total Harmonic Distortion + Noise:  0.007% @ -6dBfs
Output Impedence 150Ω
Power Consumption:  1.25W
Features   
Input Connections: RJ45 Ethernet
Output Connectors: 2 x XLR male, 1 x 3.5mm headphone out
LED Indicators: SYNC, SYS, +15V and PoE
Extras: Headphone amplifier with level control
General   
Power 15VDC 400mA (included) or PoE
Power over Ethernet (PoE): Class 1 IEEE 802.3af
Construction:  14-gauge steel
Finish: Durable Powder Coat
Size (L x W x H): 5" x 3.31" x 1.88" (12.7cm x 8.4cm x 4.8cm)
Weight: 1.45lb (0.66kg)
Shipping Size (L x W x H): 11.75" x 4.75" x 3" (29.8cm x 12.1cm x 7.6cm)
Shipping Weight: 2.1lb (0.95kg)
FCC Approval: Meets FCC Part 15B Class A requirements for Professional equipment
Conditions:  For indoor use at temperatures between +5°C and +40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.