DiNET™ DAN-TX™ Specifications

The DiNET DAN-TX is a robust solution for interfacing analog audio gear with a digital Dante-enabled network. Inputs are provided for ¼", RCA, and 3.5mm connections; so instruments, mobile phones, tables, and professional audio gear can be seamlessly integrated. The DAN-TX handles signal levels up to +24dB, so even the hottest outputs can be used without overloading the device. Side switches allow you to configure the DAN-TX for use with either instruments or line level devices, engage a -20dB pad, or utilize a high-pass filter when needed. 24bit / 96kHz converters ensure the best possible audio quality, and 14-gauge steel construction ensures the DAN-TX will stand up to the toughest touring conditions.

Audio Circuit Type:  High current balanced active input device
Number of Channels: 2
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, and 96kHz
Bit Depth: 24 bit
Frequency Response: 20Hz - 20kHz
Idle Channel Noise:  -108dB
Dynamic Range: >103dB
Channel Separation: >85dB
Equivalent Input Noise: -98dB
Total Harmonic Distortion + Noise:  0.008% @ -6dBfs
IMD:  0.0017% -10dBfs
Unbalanced Input Impedence - Instrument Mode 240kΩ
Balanced Input Impedence - Line Mode 40kΩ
Unbalanced Input Impedence - Line Mode 20kΩ
Power Consumption:  1.25W
Input Connections: 2x ¼" TS/TRS, 3.5mm TRS, 2x RCA
Output Connectors: RJ45 Ethernet
LED Indicators: SYNC, SYS, +15V and PoE
Pad: -18dB
HPF: -12dB/octave @ 80Hz
Power 15VDC 400mA (included) or PoE
Power over Ethernet (PoE): Class 1 IEEE 802.3af
Construction:  14-gauge steel
Finish: Durable Powder Coat
Size (L x W x H): 5" x 3.31" x 1.88" (12.7cm x 8.4cm x 4.8cm)
Weight: 1.45lb (0.66kg)
Shipping Size (L x W x H): 11.75" x 4.75" x 3" (29.8cm x 12.1cm x 7.6cm)
Shipping Weight: 2.1lb (0.95kg)
FCC Approval: Meets FCC Part 15B Class A requirements for Professional equipment
Conditions:  For indoor use at temperatures between +5°C and +40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.