Decoder™ Specifications

The Radial Decoder is a stereo mid/side matrix that features three built-in microphone pre-amps. As a mic pre, it can be used with two or three microphones during tracking to capture a pre-mixed stereo M/S signal to tape. Switch the Decoder to +4dBu line level operation, and you can Reamp™ pre-recorded tracks through its matrix. No matter how you choose to use the Decoder, the mid/side process has never been easier!


Specifications   
Audio circuit type:  High grade Mic Preamp & Op-amp based M-S Matrix
Frequency response:  20Hz to 20kHz
Total harmonic distortion:  <0.005%
Dynamic range:  96dB
Input impedance:  10K
Mic input gain: +65dB
Line input gain: +25dB
Max output: +17dBu
Ouput impedance: 300 Ω
Equivalent input noise (EIN): <-115dBu
Noise floor: -80dBu @ 40dB of gain
Intermodulation distortion: <0.01%
Features   
Controls:  Mic/Line Gain 1, 2a & 2b
Switches:  Mic ON, HPF, Phantom Power,2a to 2b link, 2b phase invert
High pass filter:  100Hz, -12dB / octave
General   
Construction:  14-gauge steel chassis & outer shell
Finish: Durable powder coat
Size: (W x H x D) 4.5 x 2 x 6" (114 x 57 x 147mm)
Weight:  2.8lbs (1.3Kg)
Shipping size: (L x W x D): 4.75 x 2.5 x 10.75" (121 x 64 x 273mm)
Shipping weight: 3.05lbs (1.4Kg)
Power:  15V 400mA Power Adapter 
Conditions: For use in dry locations only between 5°C and 40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.