Exo-Pod™ Specifications

The Exo-Pod is a passive modular splitter for professional audio distribution to a large number of mic or line level recorders. Exo-Pods can be used with the mPress modular press box or as a standalone device, with the ability to daisy-chain multiple units together for even more outputs. Each Exo-Pod features ten XLR outputs with ground lift switches, and four 3.5mm stereo TRS jacks; all of these outputs are transformer isolated. A trim control at the input allows you to adjust the level. The Exo-Pod is built to last, with a 14-gauge steel enclosure and a steel handle that protects the XLR input, loop-thru output, and trim control. With its flat frequency response and noise-eliminating isolation transformers and ground lifts, the Exo-Pod will ensure that your audio is distributed cleanly.

Click to view larger.
Specifications  
Specifications are subject to change without notice.
Audio circuit type: Passive
Frequency response: <20Hz to >20kHz ±1dB
Total harmonic distortion: 0.001%
Dynamic range: >136dB / >100dB
Input impedance: 350 Ω
Common mode rejection ratio: 63dB
Gain - input to XLR output: -3.5dB / -18dBu
Gain - input to mini out: -1.3db / -20dB
Clip level - input: >+26dBu
Output impedance - XLR outs: 1000 Ω
Output impedance - mini outs: 4600 Ω
Equivalent input noise: -108dBu/-84dBu
Noise floor - XLR out: -111dBu
Noise floor - mini out: -86dBu
Intermodulation distortion: 0.006%
Phase deviation: -5/+25°
Features  
Controls: Input level trim
Switches: Ground lifts
General  
Construction: 14-gauge steel chassis & outer shell
Finish: Durable powder coat
Size: L:11.75"" x W:5" H:2.25" (298.45mm x 127mm x 57.15mm)
Weight: 3.6lb
Shipping size: L:13.37" x W:5.5" H:3.25" (571.5mm x 260.35mm x 114.3mm)
Shipping weight: 4lb
Warranty: Radial 3-year, transferable