JPC™ Specifications

The JPC is a stereo consumer to mic level interface that offers a myriad of input connector options to simplify interfacing your computer, DVD/CD, MP3 player or other consumer audio device with the world of balanced professional audio equipment. As with all Radial products, tremendous attention has been paid to quality construction and delivering exceptional audio performance while eliminating noise.

Specifications are subject to change without notice.
Audio circuit type: Unity Gain buffers and inverters using low noise high end audio grade operational amplifiers
Frequency response: 20Hz ~ 20kHz +/- 2dB
Signal to noise ratio:  
Dynamic range: 111dB
Noise floor: -97dB below 0dB Out
Equivalent input noise: -94dBu
Maximum input: +17dBu
Phase deviation: +29º at 20Hz | -5º at 1kHz | -80º at 20kHz
Total harmonic distortion: 0.01% @ -15dBu Output
Inter-modulation distortion: Less than 0.15% at any level below clipping
Input impedance: 10kΩ
Output impedance: 600Ω
Input pad: -15dB
48V power LED Two 48V phantom indicators, one for each channel
Ground lift: Disconnects pin-1 at the XLR outputs
XLR configuration: AES standard (pin-2 hot)
Power: 48V Phantom Power (each channel requirers 48V phantom)
Construction: 14 gauge steel chassis and outer shell
Finish: Durable powder coat
Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm)
Weight: 1.55lb (720 g)
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable
Click Here for Graph Guide
Click to view larger graphs