JX62™ Specifications

The Radial JX62 is an unbalanced guitar selector with a built in ABY amp switcher. Special attention on maintaining the signal integrity by way of class-A buffers and carefuly chosen transformers has been applied throughout the design. Minimizing noise, hum and buzz is also a top priority, as is presenting the user with a logical and straight forward user interface.

Click to view larger.
Specifications are subject to change without notice.
Audio Circuit Type: Class-A buffers with optical switching
Frequency Response: 20Hz ~ 20kHz (± 1dB)
Dynamic Range: 120dB
Maximum Input: +18dBu
Total Harmonic Distortion: 0.007%
Phase Deviation: <10° @ 50Hz
Intermodulation Distortion: 0.027%
Equivalent Input Noise: -94.7dBu
Noise Floor: -89.7dBu
Input Impedance: Variable from 22K Ohm to 1M Ohm
Output Impedance - XLR Output: 680 Ohms
Output Impedance - Phone Output: 3500 Ohms
Clip Level - Headphone Output: 5V RMS (Really loud!)
Gain - Channel Input to XLR Output: +5dB
Clip Level - Front Panel Tuner Out: +22dBu
Clip Level - Channel Output: +22dBu
Unbalanced Inputs: 6 x ¼" hi-Z guitar inputs
Unbalanced Thru-puts: 6 x ¼" hi-Z guitar thru-puts
Unbalanced Outputs: 4 x ¼" hi-Z amplifier outputs, 2 x tuner out
Balanced Outputs: 4 x XLR lo-Z XLR male
Effects Loop: ¼" send & receive
Remote: ¼" TRS & XLR for optional JR2 remote
Power: External supply 500mA with XLR-4 connector
Construction: 14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size (L x W x H): 17.5" x 6" x 1.75" (44.5cm x 15.25cm x 1.75cm)
Weight: 6.95lb (3.2kg)
Shipping Size (L x W x H): 22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm)
Shipping Weight: 9.2lb (4.2kg)
Warranty: Radial 3-year, transferable