Click to view larger image
  • "The Radial JX62 is the perfect solution for using multiple guitars and amps. Works flawlessly with my wireless systems and I love the effects loop to run out to my pedal board onstage. I noticed an improvement in my guitar tone right away!"

    Emerson Swinford
    (Rod Stewart, Idina Menzel)
    Emerson Swinford

Radial JX62™ guitar and amp stage switcher

Part No. R800 6510
  • Select between 6 guitars and 2 amps
  • 100% discrete, class-A buffers for best sound
  • PFL and headphone amp for system checks
  • 2 built-in Radial DI boxes for acoustic guitars

The Radial JX62 is a guitar and amp switcher designed for both wired and wireless guitars in a live concert touring environment. It features Radial's award winning 100% discrete, class-A buffers for optimal signal transfer without distortion or artifact and isolated outputs to eliminate hum and buzz caused by ground loops.

Housed in a 1 RU, 19" rack enclosure, the JX62 begins with 6 input channels, all of which are equipped with ¼" input and separate thru for a dedicated amplifier plus a trim control to balance the signal levels. Channels 1 and 2 are supplemented with Drag™ Control load correction to optimize tone when using wired connections. Channels 5 and 6 are equipped with dedicated Radial DI box outputs to send a 'clean' acoustic or bass signal direct to the PA system. Any or all channels may be active at one time and routed to a master bus which offers choice of AB outputs and features an effects loop for pedal trays. Both AB outputs are transformer isolated to eliminate ground loops and equipped with ground lift switch and polarity reverse to phase align amps if reversed. Both XLR and ¼" outputs are available for greater flexibility. Switching between outputs may be done from the front panel via an optional Radial JR2 remote footswitch.

For the stage tech, the JX62 sports a PFL (pre-fade-listen) and headphone amp that enables any or all inputs to be monitored without affecting the output. A separately buffered tuner/monitor output on the front panel follows the PFL select and may be used for quiet tuning.

JR2

Dual Remote Footswitch

JX44

Air Control Guitar
Signal Manager

SWITCHBONE

ABY Selector

JX62™ - Applications
Using the JX62 with a guitar rig

The JX62 is the ultimate instrument and amp selector for a busy rock star! Connect four wireless guitars and then switch between two amps using the optional JR2 footswitch. Add a couple of acoustics with direct outs to the PA system.



(click on images to view larger)
Using the JX62 with a bass setup

Use the JX62 to switch between your favorite electrics and an upright. Channels 5 and 6 have direct outs to feed the PA system, eliminating the need for external direct boxes. Use the optional JR2 to mute the basses when tuning or switching instruments.

Using the JX62 with a multi-instrumentalist

With six inputs, the JX62 makes it easy to switch between six instruments on stage. Individual trim controls let you match the signals for the perfect balance. Use the direct outs with some Radial DI boxes if you have channels to spare!