LX-2™ Specifications

The LX-2 provides two very useful features in one compact device; transformer-based audio splitting and fully variable signal attenuation. An industry-leading Jensen JT-11-FLPCH transformer passively splits the input signal to one isolated and one direct XLR output, blocking DC voltage and helping to prevent buzz and hum from ground loops. Ground lift switches on each output allow for further noise abatement from ground loops. When signal attenuation is necessary, for example when recording the output of a hot mic preamp, a variable trim control can be accessed via a set & forget switch, providing easy adjustment of the overall audio level. The combo input on the LX-2 can be accessed via XLR or ¼" connectors; unbalanced inputs will automatically be balanced at the isolated XLR output. The LX-2 is housed in a 14-gauge solid steel enclosure, with I-beam construction and heavy duty connectors and components, for years of worry-free use on stage and in the studio.

Audio Circuit Type:  Passive, transformer based
Frequency Response: 20Hz - 20kHz +/-0.5dB
Total Harmonic Distortion:  <0.001% @ 1kHz
Dynamic Range:  140dB
Gain: -1.5dBu
Maximum Input: +21dBu
Max Attenuation — Trim Control: -10dB into a 10kΩ load
Noise Floor:  -119dBu
Phase Deviation:  +0.3° @ 20Hz
Common Mode Rejection:  94dB @ 60Hz, 83dB @3kHz
Input Impedance:  716Ω
Output impedance:  116Ω 
Transformer: Jensen JT-11-FLPCH
Trim On: Engages input trim control
Trim Knob: Variable input attenuator
Ground Lifts: Disconnects pin-1 at XLR output
XLR Configuration: AES standard (pin-2 hot)
Connectors: Combo XLR/¼" input, XLR-M iso and direct out
Construction:  14-gauge steel
Finish: Durable Powder Coat
Size (L x W x H): 84mm x 127mm x 48mm (3.3" x 5" x 2")
Weight: 0.7kg (1.5lbs)
Shipping Size (L x W x H): 102 x 76 x 165mm (4" x 3" x 6.5")
Shipping Weight: 0.87 kg (1.92 lbs)
Conditions:  For indoor use at temperatures between +5°C and +40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.