PowerStrip™ Specifications

The Radial PowerStrip is a single space, 19" 3-slot 500 series power rack that follows the guidelines set out in the Workhorse open-source document (Whos-Doc). This accommodates the very latest Radial modules while being backward compatible with older formats. Regarding the audio performance - there is no audio circuitry other than connectors. The Strip will not impart any color, distortion or artefact. The PowerStrip employs Edac gold plated 15-pin card-edge connectors on the inside and Neutrik connectors with non-tarnishing nickel-silver contacts on the back panel for excellent signal transfer. Each slot is equipped with an auto-resetting fuse to protect the system should a faulty module be employed. A 500 milliamp external supply provides plenty of current to feed the modules and 48V for phantom power.

Specifications  
Specifications are subject to change without notice.
Circuit Type: Connection buss from modules to connectors
Format: 19" rack mount, 1 rack space
Number of Slots: 3
Input Connectors: 3 balanced XLR male, 3 ¼" TRS
Output Connectors: 3 balanced XLR female, 3 ¼" TRS
Compatibility: Adheres to the Whos-Doc and VPR Alliance
Functions
Omniport: Yes
Feed Switch: Yes
Stereo Link: Yes
48V Phantom Power: Yes on all channels
Electrical
Available Current: 500 milliamps
Average Current 166 mA per slot
Card Slot Impedance: Module dependent
Ground Connections: Chassis
XLR Pin Wiring: AES standard: pin-1 ground, pin-2 (+), pin-3 (-)
Power Supply: External 100V - 240V AC with 48V Phantom
PSU Connection: Locking 5 pin XLR female on cable
Product Size (L x W x H): 19" x 7.25" x 1.25" (48.3cm x 18.4cm x 3.2cm)
Shipping Size (L x W x H): 22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm)
Product Weight: 6.7lbs (3kg)
Shipping Weight: 8.9lbs (4kg)
Conditions: For use in dry locations only between 5°C and 40°C