Radial ProD2 Top View
Click to view larger image
  • Radial ProD2 with Joey DeFrancesco
    Joey DeFrancesco

    "The Radial DI is the cleanest, warmest and best (!!) I've found for plugging my organ in direct."

    Joey DeFrancesco
    (Miles Davis, Jimmy Smith, John McLaughlin)
    Joey DeFrancesco
  • Radial ProD2 with Jim Warren
    Jim Warren

    "Pristine audio clarity with silky highs and a punchy low end makes the Radial ProD2 a no-brainer for me when it comes time to choose a DI."

    Steve Smith
    (Journey, Vital Information, Bryan Adams, Larry Coyell)
    Steve Smith
  • Radial ProD2 and Herbie Hancock
    Herbie Hancock

    "If you don't use Radial DIs, then you aren't getting the best out of your equipment. I will never use any another make of DI after using Radial."

    Nigel Hopkins
    (Chris de Burgh, Jon Lord, Elvis Costello)
    Nigel Hopkins
  • ProDI - Alan Parsons
    ProDI - Alan Parsons

    "Our lives changed when we started carrying our own Radial DI's on the road. We use the ProDI, ProD2 and the JDI on bass. Our Radial Direct Boxes are rugged, reliable, and sound great - so much better than the competition - in fact there is no competition!"

    Alan Parsons
    (The Beatles, Pink Floyd, Al Stewart,
    Alan Parsons Project)
    Alan Parsons
Radial ProD2 Stereo Direct Box

ProD2™ Stereo Direct Box

Part No. R800 1102

  • Stereo direct box designed for keyboards
  • Smooth, warm sound rounds out digital edge
  • Able to handle huge transients without choking
  • May be rack mounted for touring rigs

The Radial ProD2 is a compact stereo direct box developed specifically to address the needs and challenges of interfacing a stereo keyboard to a professional audio system. This passive DI features two independent channels with separate inputs and thru-puts for the artist's stage amp and two fully isolated outputs for the PA system.

At the heart of the design are two high performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops.

As with all Radial products, the ProD2 is built tough to handle the rigors of professional touring. A 14-gauge steel ultra rigid i-beam skeleton frame eliminates opportunity from outside stress to flex the sensitive PC board and cause premature solder joint failure. The innovative book-end design creates a protective zone around the connectors and switches further increasing lifespan. And a full bottom no-slip pad adds mechanical isolation and electrical insulation to further reduce opportunity for noise.

The Radial ProD2's warm sound, legendary build quality and compact design have made it the most popular stereo direct box made today.

JDI DUPLEX

Stereo Direct Box

PROD8

Eight Channel Rackmount Direct Box

J-Rak

Direct Box Rackmount Adaptors

ProD2™ - Applications
ProD2 with Stereo Keyboard

The ProD2 is designed for stereo devices like keyboards. Simple, straight ahead hookup makes it easy to connect your keys to your recording system for great stereo sound!

(click on images to view larger)

ProD2 with Drums & Samplers

Driving the output from a sampler or electronic drum machine to the PA system has never been easier. The ProD2 delivers plenty of headroom and lets you connect a local DJ mixer too.

ProD2 with Instruments

Two Radial ProDI direct boxes in one, multi instrumentalists rejoice! The ProD2 is perfectly well suited for bass, acoustic guitar or just about any instrument with a pickup.

ProD2 as a splitter

Take the mono output from your keyboard and patch it into Ch 1, use the THRU on Ch 1 to send a split signal to Ch 2. Voila! Two isolated mic level outputs to send to FOH and Monitors!