ProRMP™ Specifications

The Radial ProRMP Reamp is a transformer coupled passive device designed to take a balanced line level signal and convert it so that it can drive the high input impedance of a guitar amplifier. As a passive device, it does not amplify the signal in any way. Critical to the performance is the frequency response and low distortion. The ProRMP is perfectly suited for Reamping and warming the balanced output of a wireless system.

Specifications are subject to change without notice.
Audio circuit type: Passive, transformer isolated
Frequency response: 20Hz ~ 20KHz (+0/-1dB)
Dynamic range: >137dB
Equilavent input noise: >-98dBu Noise plus gain
Phase deviation: 0.3° @ 100Hz; 5° @ 20Hz
Gain: >-10dB
Maximum input: >+26dBu
Total harmonic distortion: 0.003%
Common mode rejection ratio: 100dB @ 60Hz (unbalanced source)
Input impedance: 600 Ohms
Output impedance: 600Ω, balanced
Noise: -111dBu
Signal to noise ratio: 81dB
Input pad: -15dB
180° polarity reverse: Inverts signal polarity
Ground lift: Disconnects pin-1 at XLR output
Merge: Input summing mixer
Speaker filter: -30dB pad and band-pass filter
XLR configuration: AES standard (pin-2 hot)
Power: Passive, no power required
Construction: 14 gauge steel chassis and outer shell
Finish: Durable powder coat
Size: Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm)
Weight: 1.55 lbs (720 g)
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable
Click Here for Graph Guide
Click to view larger.