StageBug™ SB5W Specifications

The Radial SB5W is a passive stereo direct box designed to interface consumer audio devices such as laptops and tablets to a professional audio system. Designed to fit a standard Decora wall plate, the SB5W features an integral design that is completely shielded to protect against external radiation. As a passive device, the SB5W presents excellent performance while providing isolation to eliminate hum and buzz caused by ground loops.

Front Panel Dimensions
Side View Dimensions
Audio circuit type:  Passive transformer isolated
Frequency response:  20Hz - 20kHz
Dynamic range:  >120dB
Noise floor:  -101dBu
Equivalent input noise: -98dBu
Maximum input:  +20dBu
Phase deviation:  0° @ 100Hz; -3° @ 50Hz 
Total harmonic distortion:  0.002%
Input impedance:  Approx 10K with 100K Load 
Output impedance:  5k Ohms 
Gain: -3dB
Clip level - output: +17dBu
Stereo Separation:  >77dB
Controls: Level control adjustable passive trim
Mono:  Mixes left and right inputs
Ground lift:  Disconnects audio ground at both terminals
Inputs: RCA and 3.5mm TRS stereo inputs
Outputs: Screw down terminals (- G +)
Construction:  14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size: (L x W x H) 2.42" x 1,62" x 4.24" (61.4mm x 41.1mm x 107.7mm)
Weight:  0.5 lbs (227 grams)
Shipping size: (L x W x D): 6.25" x 4.25" x 3" (159mm x 108mm x 76mm)
Shipping weight: 0.65 lbs (295 grams)
Power:  Passive, no power required 
Conditions: For use in dry locations only between 5°C and 40°C
Installation: Only use in low voltage systems and enclosures
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.