StageBug™ SB-6 Specifications

The SB-6 is a passive isolator that has been designed to work with both balanced and unbalanced signals. As detailed in the graphs below, the SB-6 is exceptionally linear throughout the audio range and exhibits nearly flawless phase shift even in the lower registers. Very low distortion from -40dB to +10dB makes the SB-6 ideally suited for instruments, consumer audio devices and pro-balanced audio signals, while the compact size makes it easy to integrate in just about any situation.



Specifications   
Audio circuit type:  Passive Transformers
Frequency response:  20Hz-20KHz +/-1db
Dynamic range:  >140db  
Maximum input:  >+25dBu
Gain:  -2dB
Total harmonic distortion:  <0.0008% @ 1kHz
Phase deviation:  >5° @ 30Hz
Input impedance:  Varies with Load/47K
Output impedance:  600Ω
Features   
Transformer: Eclipse Custom
Input pad:   -15dB
Polarity: 180deg reverse
Ground lift:   Disconnects TRS sleeve at output
Input connector: 1/4" TRS phone
Output connectors: 1/4" TRS phone
General   
Construction:  14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size: (L x W x D) 4.5" x 1,85" x 1.35" (114mm x 47mm x 34mm)
Weight:  0.9 lbs (408 grams)
Shipping size: (L x W x D): 8" x 5" x 3" (203mm x 127mm x 76mm)
Shipping weight: 1.0 lbs (453 grams)
Power:  Passive, no power required 
Conditions: For use in dry locations only between 5°C and 40°C
Warranty:  Radial 3-year, transferable
Specifications are subject to change without notice.