Submix™ Specifications

The Radial SubMix is a 500 series module designed to elegantly handle four sources and mix them via a series of four front panel controls. Because the SubMix does not incorporate effects or equalization, it is extremely quiet and behaves very, very well within its -10dB to +12dB working range. The SubMix delivers exceptional audio with less than 0.002% distortion at all frequencies.

Click images to view larger

Specifications are subject to change without notice.
*Refers to use with Radial Workhorse rack and mixer.
Circuit type: Op-Amp w/ accustate gain control
Frequency response: 20Hz to 20KHz
Phase response: < 8 degrees at 20Hz
Maximum input: +12dBu
Maximum output: +16dBu
THD + N: <0.005%
Dynamic range: 97dB
Equivalent input noise: -103dBu
Intermodulation distortion <0.006%
Pad Auto padding input
Omniport function Expansion input for buss
XLR output configuration Pin 1 = GND, Pin 2 = +, Pin 3 = -
Power requirement: +/- 16V @ 31 mA
Shipping size (L x W x H) : 9 x 6.5 x 2 (inches)
Weight 1.5 lbs. (0.7 kg)
Conditions: For use in dry locations only between 5°C and 40°C
Warranty 3 Years, Transferable
Click to view larger