X-Amp™ Specifications

The Radial X-Amp is a high performance active Reamp designed to smoothly interface a pre-recorded guitar signal to a guitar amplifier. Careful attention has been applied to gently roll off the high end so that the brightness of the recorder is softened for a more natural rendering. Designed to reproduce typical guitar levels below -10dBu, the X-Amp delivers remarkable performance with very little distortion or self noise.

Specifications are subject to change without notice.
Audio circuit type: 100% discrete class-A
Frequency response: 20Hz ~ 15kHz (± 1.0dB)
Signal to noise ratio: 88dB below instrument level (-20dBu)
Dynamic range: 119dB
Noise floor: OUT-1 -110dB; OUT-2 -108dBu
Maximum input: +22dBu
Total harmonic distortion: 0.02% @ -15dBu
Inter-modulation distortion: 0.02% @ -20dBu
Input impedance: 600Ω
XLR input: Balanced line-level, AES standard (pin-2 hot)
Ground lift (input): Disconnects pin-1 at the XLR input
Output level: Adjustable
Output type: Out-1 direct, Out-2 isolated
Polarity: 180º polarity reverse on output-2
Power: +15VDC/400mA adapter included
Construction: 14 gauge steel chassis & outer shell
Finish: Durable powder coat
Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm)
Weight: 1.55lb (720g)
Shipping size: 5" x 2.75" x 10.75" (127 x 70 x 273mm)
Shipping weight: 2.6lb (1.18kg)
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable
Click to view larger graphs