![](https://www.radialeng.com/wp-content/uploads/2018/04/JX44-front.jpg)
Panic
Emergency bypass switch with LED indicator overides other controls and defaults to input-A to output-1.
Input A & B
with front and rear jacks (front jacks have priority over rear) and DRAG load correction.
Drag Control
Retains the feel of the instrument by correcting the load passive pickups see.
Input C & D
with rear input jacks and TRIM controls to balance instrument levels.
System Monitor
with six LEDs for at-a-glance system status.
On/Off
switch with LED indicator. Manual or program modes.
Amp Outs
Transformer isolation to eliminate noise caused by ground loops.
180°
Polarity reverse to phase correct amps & effects pedals.
Ground Lift
stops hum caused by ground loops.
Mute
Convenient front panel switch for silent tuning.
![](https://www.radialeng.com/wp-content/uploads/2018/04/JX44-rear.jpg)
Power
15VDC power supply connection with innovative cable lock to prevent accidental power loss.
Remote Control
ports connect to the JR-5 footswitch with standard mic cables.
Amp Outputs
Two single amp outputs and two dual amp outputs for up to six amplifiers.
Tuner & Mute
buffered output for an electronic tuner and simple footswitch mute.
Effects Loop
local effects loop send & receive jacks for pedals and rackmount effects.
Direct Box
Built-in Radial direct box for PA, recording and reamping.
X-Amp
Balanced re-amping interface with level control.
SGI Loop
Balanced effects loop works with SGI•44 to drive long cables to and from a pedalboard.
Rear Inputs
Instrument inputs for rackmount preamps and wireless systems.