10-segment LED is divided into two: the left side indicates compression while the right conveys the output level. Easy to read and fast, it provides instant visual feedback of signal status.
1
Limiter
12 position dial lets you choose between brick-wall limiter, bypass and the Clipper; an ‘old school diode-bridge clipping circuit’ with 10 graduated settings that range from slight clipping to over-the-top distortion.
2
3-Speed VCA
Three settings with feed-forward auto-detection makes it easy to set the attack and release time constants. Slow for vocals, medium for instruments and fast for percussion.
3
Compressor
State of the art FlexKnee compression circuit dynamically transforms from soft to hard knee as it follows the compression ratio setting. Variable with up to 10:1 compression. Single dial control.
4
Sync
Sets up master-slave configuration sharing the same time constant for optimal stereo dynamic coupling while maintaining independent channel compression.
5
Input
Lets you toggle the threshold between +4dB and -10dB to optimize the input range, making the Komit easy to interface with all types of program material.
6
Gain
Variable up to +22dB provides gain make-up when signals are compressed. Also used to drive the Clipper hard for extra character.
7
On
Bypass switch lets you quickly compare the original pre-compressed signal to the settings you have selected on the Komit. Push in to turn on!
8
Omniport
Designated as a key input to allow external control over the compressor side chain. Available when used with the Workhorse.