10kHz shelving control lets you enhance high-frequencies to add sparkle or air or soften the top end to warm up overly aggressive tracks.
Used to adjust the amount of mid boost or cut being applied to the signal. Up to 12dB of boost or cut is available.
Lets you sweep the upper mid band between 1kHz to 8kHz to find the optimum center frequency.
Lets you set the width of the mid-range frequency bands. Wider for more musicality or narrower for surgical precision.
Lets you sweep the lower mid band between 300Hz to 2.4kHz to find the optimum center frequency.
Turns on the equalizer or acts as a bypass so you may compare the wet post EQ effect with the dry pre-EQ signal.
Configured as a TRS in-out connection. This lets you patch to-and-from the insert point of your mixing console using a single ¼” TRS cable.
Notifications